基于支持向量机的航空发动机PID解耦控制

针对航空发动机多变量控制系统中各回路之间存在的耦合现象,提出了一种基于支持向量机(support vector machines,SVM)的航空发动机PID(proportion integration differentiation)解耦控制方法.利用SVM辨识发动机非线性模型,并获得SVM瞬时线性化模型,在线性化模型的基础上完成了PID参数的在线自整定.利用Lyapunov稳定性定理对控制器的收敛性进行了分析.通过对某型航空发动机的仿真,验证了该方法的有效性和可行性.      

爆震管壁面热负荷实验

在一台内径61 mm、长度1140 mm的气动阀式脉冲爆震发动机(PDE)上,进行了爆震管热负荷的测量计算,主要采用了两种换热模型:一是自然对流和热辐射模型;二是强迫对流模型.在两种方式下,爆震管的热负荷随频率的变化关系基本相同,即随频率升高而热负荷增大,但频率增加两倍热负荷增加却不止两倍.此外,在方式二的情况下,还得到煤油蒸发率随频率的变化关系,为PDE蒸发器设计提供参考.      

离心式同向双旋流器空气雾化喷嘴雾化特性研究

对一种组合式的离心式同向双旋流器空气雾化喷嘴喷雾特性进行研究.双旋流器采用旋向相同的径向开孔式设计,在常温常压下试验,研究不同空气压力降和喷嘴供油压力工况下液雾的索太尔平均直径及分布指数.试验中以航空煤油为介质测试其雾化性能,采用马尔文激光测雾仪测量喷嘴下游50 mm处的液雾分布.结果表明:随着空气压力降和喷嘴供油压力的增大,索太尔平均直径减小,分布指数增大,推导了在空气压力降Δp/p＞3%和Δp/p＜3%两种工况下索太尔平均直径计算模型.      

Orbital phase spectroscopy of four high mass X-ray binary pulsars to study the stellar wind of the companion

Our work focuses on a comprehensive orbital phase-dependent spectroscopy of the four High Mass X-ray Binary Pulsars (HMXBPs) 4U 1538-52, GX 301-2, OAO 1657-415 and Vela X-1. We hereby report the measurements of the variation of the absorption column density and iron-line flux along with other spectral parameters over the binary orbit for the above-mentioned HMXBPs in elliptical orbits, as observed with the Rossi X-ray Timing Explorer (RXTE) and the BeppoSAX satellites. A spherically symmetric wind profile was used as a model to compare the observed column density variations. Out of the four pulsars, only in 4U 1538-52, we find the model having a reasonable corroboration with the observations, whereas in the remaining three the stellar wind seems to be clumpy and a smooth symmetric stellar wind model appears to be quite inadequate in explaining the data. Moreover, in GX 301-2, neither the presence of a disk nor a gas stream from the companion was validated. Furthermore, the spectral results obtained in the case of OAO 1657-415 and Vela X-1 were more or less similar to that of GX 301-2.     

Tomographic reconstruction of the ionospheric electron density as a function of space and time

Electron density distribution is the major determining parameter of the ionosphere. Computerized Ionospheric Tomography (CIT) is a method to reconstruct ionospheric electron density image by computing Total Electron Content (TEC) values from the recorded Global Positioning Satellite System (GPS) signals. Due to the multi-scale variability of the ionosphere and inherent biases and errors in the computation of TEC, CIT constitutes an underdetermined ill-posed inverse problem. In this study, a novel Singular Value Decomposition (SVD) based CIT reconstruction technique is proposed for the imaging of electron density in both space (latitude, longitude, altitude) and time. The underlying model is obtained from International Reference Ionosphere (IRI) and the necessary measurements are obtained from earth based and satellite based GPS recordings. Based on the IRI-2007 model, a basis is formed by SVD for the required location and the time of interest. Selecting the first few basis vectors corresponding to the most significant singular values, the 3-D CIT is formulated as a weighted least squares estimation problem of the basis coefficients. By providing significant regularization to the tomographic inversion problem with limited projections, the proposed technique provides robust and reliable 3-D reconstructions of ionospheric electron density.     

内增湿式质子交换膜燃料电池堆动态传热模型

建立了质子交换膜燃料电池阴极的传质模型,综合考虑了影响电堆传热的多个因素,在此基础上针对内增湿式燃料电池堆建立了动态传热模型.采用Runge-Kutta-Felhberg法对模型进行求解,对电流、反应物过量系数、压强、冷却水流量等对电堆温度的影响进行了研究.结果表明,当电流大于25A时电堆温度将不能自行稳定在80℃以下,采用水冷可以有效地将电堆温度控制在较理想的范围内.在额定功率为5kW的燃料电池堆试验台架上进行了热管理试验,试验结果同模型预测值吻合较好.     

基于ICP算法的手术导航三维配准技术

针对计算机辅助手术三维导航技术中术前CT图像与术中实际空间的配准问题,提出一种基于最近点迭代(ICP,Iterative Closest Point)算法的特征点云配准技术.利用医学图像空间和实际空间特征区域的两片点云坐标进行三维配准.对CT图像进行重建、分割及交互式操作得到医学图像特征点云;利用光学定位仪实时采集实际空间中对应区域的点云;通过主元分析(PCA,Principal Component Analysis)获取两组点云数据的特征向量进行初配准;进行最近点迭代使配准矩阵收敛到一个最优解,其中采用k-d tree寻找邻近点加速迭代过程.以塑料脊柱模型骨为对象进行了脊柱手术导航配准精度实验,进一步对实验中的点云数据加入高斯噪声以进行误差分析.结果表明这种配准方法简单可靠,在模型骨情况下配准精度在1mm以内.     

用于无人驾驶直升机的中继转发系统设计

无人机是当今世界先进技术的热门载体,针对无人驾驶直升机的特点提出了应用于无人直升机上的中继转发系统的方案,论述了该系统的设计方案、总体结构、工作过程以及实现时遇到的技术难点、解决方案.所描述的中继转发系统与通常意义的中继转发系统最大区别在于所转发的频带宽,达百兆赫兹;该系统具备对远距离信号的转发能力,动态范围达100dB;该系统具备对弱信号检测能力,灵敏度可达-100dBm;采用了多通道窄带传输抗干扰技术,提高了系统的抗干扰性能.该系统搭载在无人驾驶直升机上进行了大量实际飞行试验,试验数据表明,该中继转发系统具有频带宽、灵敏度高与抗干扰能力强的优点,满足项目需求指标.     

无人作战飞机对地攻击效费比分析

UCAV(Uninhabited Combat Aerial Vehicle)具有高隐身、高机动、不涉及飞行员以及全寿命周期费用低等特点.针对UCAV的特点,应用适应现代作战飞机效费比分析的方法和手段,仿真计算了UCAV的隐身、作战半径、机动能力以及武器装载等主要设计参数与对地攻击效能的关系,计算了UCAV主要设计参数与全寿命周期费用的关系,研究了未来UCAV同有人作战飞机及巡航导弹在面临相同的威胁环境、执行相同的对地攻击任务时的效费比情况,并对UCAV在未来作战中的地位进行了分析.研究表明,UCAV在执行对有防空系统保护的敌重要目标进行攻击的任务时,综合效费比高于巡航导弹和有人隐身飞机.